Great question! Yes, absolutely—all our street benches are manufactured with pre-drilled holes specifically designed for bolting to the ground. We know that safety and stability are top priorities when installing seating in public areas, so we make sure every bench leaves our facility ready for permanent anchoring.
The standard configuration includes two pre-drilled holes on each leg flange, typically ½ inch (12.7 mm) in diameter. These holes are spaced 4 inches apart on center, which aligns with common anchoring patterns used in concrete and asphalt surfaces. For most models, the holes are located 1.5 inches from the outer edge of the flange, providing plenty of clearance for washers and nuts.
We recommend using stainless steel or zinc-plated wedge anchors or expansion bolts—sized at ½ inch by 3 to 4 inches long—depending on your specific surface material. If you're installing on pavers or wood decking, heavy-duty lag bolts with shields work well too. We can also provide a template with exact hole positions to make layout a breeze.
One thing to keep in mind: while the holes are factory-drilled, the bolts and anchors themselves are not included with the bench. This gives you the flexibility to choose the best hardware for your local soil conditions, weather exposure, and local building codes. We do offer a hardware kit as an optional add-on if you prefer a one-stop solution.
For custom orders—such as benches with extra anchoring points for high-wind areas or specific hole patterns for unique mounting brackets—just let us know. Our engineering team can adjust the drilling layout at no extra cost for large volume projects.
So in short: yes, pre-drilled holes are standard, the specs are consistent across our line, and installation is straightforward. If you have any specific bench model in mind or need a dimension sheet, I’m happy to send you the details.