Absolutely. When I recommend a park bench that is wheelchair accessible on both ends, I look for an open-end design—not a bench with full side panels or end armrests. That way, a wheelchair user can approach from either side, park next to the bench, transfer, or sit beside a companion.
Here is the setup I would choose.
First, pick a 6-foot commercial bench with a single center armrest only. No end armrests, no closed end panels. The center armrest helps people push up to stand without blocking either end.
Second, install it on a level concrete pad or compacted, slip-resistant surface. Leave at least 30 by 48 inches of clear space at each end, but 48 by 60 inches is better if you want comfortable turning room.
Third, choose a seat height around 17 to 19 inches and a depth of 16 to 20 inches. This range makes transfers from a wheelchair easier for many people.
Fourth, use powder-coated steel, aluminum, or recycled plastic lumber. These materials hold up well outdoors and do not splinter. I would avoid rough wood with sharp edges.
Fifth, add visual contrast. Choose a bench color or edge strip that contrasts with the pavement so the seating area is easier to identify for people with low vision.
If you want a specific style to search for, use terms like “ADA park bench with center armrest” or “open-end accessible bench.” Many park departments and landscape architects use commercial site furniture lines from brands like DuMor, Keystone Ridge Designs, or Landscape Forms. The key is not just the bench itself—it is the clear, level access at both ends.
So my practical recommendation is a powder-coated steel or recycled plastic bench with a center armrest only, placed on a level concrete pad with wide open space at both ends and a direct accessible route from the sidewalk. That gives you true wheelchair accessibility from either side.