Absolutely—yes, you can get a CAD drawing of an urban bench for city planning approval, and I’ll walk you through what that file should include so it passes review. Planning departments usually expect a set of scaled drawings, not just a 3D render. A typical submission includes a plan view, front and side elevations, a section through the bench, and mounting or anchoring details. If you are preparing the drawing yourself, use a real-world scale of 1:20 or 1:10 for the details and 1:50 for the overall site placement.
For a standard urban bench, I usually specify an overall length of around 1800 mm, seat height between 430 and 450 mm, overall height of about 800 mm, and seat depth of 400–450 mm. The frame can be drawn as 50×25 mm flat steel or 40×40 mm square tube with a powder-coated finish, while the seat slats are often 40×40 mm hardwood or FSC-certified timber with 10 mm gaps between slats for drainage. Include a note that all edges are rounded and that the finish is weather-resistant.
The CAD drawing should clearly label materials, dimensions, and tolerances. Add a general note section for finishes, corrosion protection, and installation: anchor bolts M10 or M12 with a minimum embedment of 80 mm into a concrete base, or surface-mounted plates with four bolts per leg. City planners also look for accessibility: leave a clear knee space of at least 650 mm in front and a stable, slip-resistant surface around the bench. If the bench has armrests, show them at 200–250 mm above the seat and ensure they do not obstruct the clear width.
When you prepare the file for city planning approval, export it as a vector PDF plus an original DWG or DXF. Name layers clearly: A-BENCH-PLAN, A-BENCH-ELEV, A-BENCH-SECT, A-BENCH-DIM, A-BENCH-NOTE. Use millimeter units. This makes the planner’s review faster and shows that the drawing is construction-ready.
If you need a ready-made CAD block, many city furniture manufacturers offer free DWG downloads for their standard benches. Check that the block matches local planning requirements, especially for heritage areas or coastal environments where materials may need to be stainless steel or recycled plastic. In short, yes—a CAD drawing of an urban bench can absolutely be provided, and the version you submit should be detailed, scaled, and formatted for approval.