URBAN BENCHES

We are seasoned manufacturer emphasizing durability, design & core production

Home ・ About ・ Product ・ Q&A ・ Contact ・ Factory ・ Main

Common Problems and Effective Solutions for urban benches

I’m replacing a broken wooden slat on a park bench—can I get a single slat from you?

Yes, you can usually get a single wooden slat from us—but I want to help you avoid the most common mistake: ordering a generic slat that doesn’t match your bench. Let me walk you through what actually matters.

First, measure the broken slat or the empty space. I need the length, width, and thickness. If the old slat is cracked but still there, measure it before you throw it away. Next, check the mounting holes. Measure center-to-center between the bolt holes, and note the hole diameter and whether the holes are countersunk. Also look at the ends of the slat: are they square, rounded, or chamfered? That detail makes a big difference on commercial benches.

The wood species matters too. Teak, ipe, oak, cedar, and pressure-treated pine are common. I can supply single replacement slats in most of those, and if your bench has a manufacturer’s plate or stamp, send me a photo—it often tells us the exact profile. If we don’t stock your exact size, we can cut and pre-drill a single slat to match.

If you’re not sure, send a photo with a tape measure next to the slat or the empty section. I’ll confirm whether a single slat is available, what it costs, and whether it makes more sense to order one or replace the whole set. For small repairs, a single slat is often all you need.

Relevant keywords:

If you have any different opinions or need to consult us further, please pay attention or send us an email. We will reply to each of you individually! Thank you for your support and trust!

Internal navigation on the site:Home About Product Question and Answer Contact

Copyright © 2013 - 2026 UrbanBenches.Com(HONGYI Factory). All rights reserved.