Short answer: yes—we offer several leveling options for a slope street bench installation. The right choice depends on the slope percentage, leg spacing, and whether you are mounting on concrete, asphalt, or compacted soil.
Our most popular solution is a set of adjustable leveling feet. These heavy-duty threaded feet replace the standard bench legs and typically provide 1.5 to 3 inches of vertical adjustment per foot. You can raise the downhill leg, lower the uphill leg, and bring the seat completely level without cutting or welding. A jam nut locks each foot in place, so the bench stays stable under regular use.
For moderate grades, sloped mounting plates are a clean option. These angled base plates sit between the bench leg and the ground, compensating for the grade while keeping the full leg in contact with the surface. They work especially well on hardscape and give the installation a fixed, finished appearance.
On steeper or uneven slopes, we usually recommend small concrete pads or footings at each leg location. We supply anchor templates so the pads can be cast level even when the surrounding ground is not. The bench is then bolted to those pads. This is the most permanent method and is commonly accepted for public works and streetscape projects.
If you share your slope percentage and surface type, we can recommend the exact bench leveling kit or pad detail for your site. All leveling components are in stock and can ship with the bench.