First, understand why skateboarders target the backrest: it offers a smooth, rounded edge with a slight lip, perfect for grinding and sliding. To deter them without turning your benches into hostile architecture, try these approaches. Install skateboard deterrents, also called skate stoppers. These are small metal or rubber bumps attached along the top edge of the backrest. They break the smooth surface needed for grinding. You can buy them online or have a local metalworker fabricate simple L-shaped brackets. Place them every 12–18 inches for best coverage. Modify the bench surface by adding a textured or rough finish like anti-slip tape, coarse paint, or a knurled metal strip to the backrest. This makes it unpleasant for skateboard wheels and trucks. Just be careful not to create sharp edges that could injure someone sitting or leaning. Change the geometry if you are replacing benches. Choose models with vertical slats, curved backrests, or armrests that interrupt the continuous edge. A backrest with a segmented design eliminates the long grinding line. Use landscaping or barriers. Planting low shrubs or placing decorative bollards a few feet behind the bench removes the approach space needed for skateboarders to pick up speed. This works especially well in parks or plazas. Apply community pressure politely. Post a small sign saying “Please no skateboarding on benches – this furniture is for sitting.” Combine it with nearby skate-friendly spots. Sometimes offering an alternative location works better than a blanket ban. Consider a temporary solution: rub a thin layer of petroleum jelly or bike chain grease along the edge. It is messy and needs reapplication, but it can break the habit quickly while you arrange permanent fixes. Remember, skateboarders are often just looking for a spot to practice. If you can work with your local council to install a simple grind rail or skate ledge in a nearby park, many will leave the benches alone. No single method works everywhere, so combine physical deterrents with community engagement for the best result.
How do I stop people from skateboarding on the backrest of our street benches?
If you have any different opinions or need to consult us further, please pay attention or send us an email. We will reply to each of you individually! Thank you for your support and trust!