Honestly, there is no single universal number because the wind load rating depends on the bench model, how it is anchored, and the specific exposure conditions in the plaza. That said, most properly anchored commercial street benches in exposed plazas are rated for wind loads around 20–30 psf, which is roughly equivalent to 90–115 mph gust speeds. That range assumes the bench is installed with the manufacturer’s specified anchors into a concrete deck or footing rather than simply sitting on the surface.
If your plaza is wide open, located between tall buildings, or near the coast, those conditions create higher local pressures and wind funneling. In those cases I would look for benches rated for 120 mph or higher, or ask the supplier for a stamped calculation based on ASCE 7 exposure categories. Also make sure the rating covers the whole assembly including the bench frame, seat, and anchorage, not just the material strength of the bench itself.
One more thing: an unanchored bench really has no meaningful wind rating. Even a well-designed bench can slide or overturn if it is not bolted down properly. So when comparing products, ask for the tested wind load with the specified anchor pattern rather than a generic wind speed on the spec sheet.