URBAN BENCHES

We are seasoned manufacturer emphasizing durability, design & core production

Home ・ About ・ Product ・ Q&A ・ Contact ・ Factory ・ Main

Common Problems and Effective Solutions for urban benches

Can I purchase a single replacement armrest for an older outdoor bench model?

Yes — in many cases you can purchase a single replacement armrest for an older outdoor bench, but the process depends on the brand, material, and how much information you still have about the bench.

Start by checking the underside of the seat, the armrest support, or the frame for a manufacturer name, model number, or metal plate. If you find the brand, go to their website and look for a “replacement parts” or “bench parts” section. Companies like Polywood, Trex, Breezesta, Loll Designs, and commercial site furniture brands often sell individual replacement armrests even for discontinued models. If the part isn’t listed online, call or email their customer service team. Many manufacturers keep spare parts or can tell you which current armrest fits your older bench.

If the bench was made by a company that no longer exists, don’t give up. A local woodworker or carpenter can make a matching replacement bench armrest using the opposite armrest as a template. This works especially well for teak, cedar, shorea, or other wooden benches. If the frame is metal, a welding or metal fabrication shop may be able to straighten, repair, or fabricate a single armrest. For molded plastic or recycled plastic benches, universal armrests are available from outdoor furniture parts suppliers, but you will need to compare measurements carefully.

When you shop, always measure the old armrest before ordering. Note the overall length, width, thickness, the distance between bolt holes, and the diameter of the mounting hardware. Take clear photos of the armrest from the front, side, and underneath, and include a photo of the bench frame where the armrest attaches. This makes it much easier for a seller to confirm whether a single replacement armrest will fit.

Where to look: manufacturer websites, outdoor furniture parts retailers, local hardware stores, eBay, Etsy, and architectural salvage yards are all good options. Search terms like “replacement bench armrest,” “outdoor bench armrest,” or the specific brand name plus “bench replacement parts” can surface the right match. If you need only one, ask the seller directly. Some armrests are sold as pairs, but many suppliers will sell a single side if you contact them. Keep in mind that if the other armrest is heavily faded or cracked, buying a pair may create a more even appearance.

Installation is usually beginner-friendly. Remove the old bolts or screws with the correct bit, clean the mounting area, and test-fit the new armrest before tightening everything. Use stainless steel hardware to prevent rust, and if the original screw holes are stripped or rotted, fill them with an exterior-grade wood filler or epoxy, let it cure, and drill new pilot holes.

So the short answer is yes: you can often buy a single replacement armrest for an older outdoor bench. Start with the manufacturer, work through parts specialists, and don’t overlook a local craftsperson who can copy the original. With measurements, photos, and a little patience, you can get your bench comfortable and usable again without replacing the whole piece.

Relevant keywords:

If you have any different opinions or need to consult us further, please pay attention or send us an email. We will reply to each of you individually! Thank you for your support and trust!

Internal navigation on the site:Home About Product Question and Answer Contact

Copyright © 2013 - 2026 UrbanBenches.Com(HONGYI Factory). All rights reserved.