Short answer: most quality outdoor benches won’t warp until surface temperatures reach roughly 150°F to 180°F (65°C to 82°C). That covers normal summer heat in most climates, but not concentrated heat sources like fire pits, grills, or reflective windows.
If the bench is high-density polyethylene (HDPE) or recycled plastic lumber, it’s typically rated for continuous exposure around 150°F and can handle short spikes up to 180°F without deforming. Darker colors absorb more heat, so a black HDPE bench in full sun can develop surface temperatures 30–50°F above the air temperature. That’s usually fine, but in extreme desert conditions it gets close to the limit, so lighter colors are safer.
Metal benches, especially aluminum or powder-coated steel, won’t warp at normal outdoor temperatures. Aluminum doesn’t soften until several hundred degrees Fahrenheit, and steel even higher. The real issue with metal is that it gets painfully hot to sit on in direct sun, and the powder coating may fade, chalk, or fail if it’s repeatedly pushed past 200°F. Structurally, warping isn’t the main concern.
Wood and wood-composite benches are more sensitive to moisture and thermal cycling than to a single hot day. Solid wood can cup, crack, or twist when it repeatedly heats and cools, especially if one side is wet. In sustained surface temperatures above 130–150°F, wood is more likely to move, though it rarely fails from heat alone. Composite decking-style benches generally have heat ratings similar to HDPE, around 150–180°F.
So if you’re asking about a quality outdoor bench made from HDPE, aluminum, or composite, I’d feel comfortable saying it can withstand surface temperatures up to about 150–180°F without warping. Beyond that, especially for plastic or composite, you’ll start risking permanent deformation. Keep it away from concentrated heat sources, choose lighter colors for full-sun desert locations, and buy something with UV stabilizers if you expect intense sun year after year.