The short answer? Metal benches are easier to wipe down and generally need less routine work, but they are not maintenance-free. Wooden benches require more regular sealing and cleaning, but they are often easier to repair and refinish when they start looking tired.
With a metal outdoor bench, your main job is rust prevention. If the bench is powder-coated steel or painted aluminum, the finish does most of the work for you. On steel, a deep scratch that exposes bare metal will eventually rust, especially in humid or coastal areas. I recommend checking the bench once or twice a year for chips, scratches, or worn spots. Sand the spot lightly, wipe it clean, and apply a matching touch-up paint or rust-inhibiting spray. For general cleaning, warm water, mild dish soap, and a soft cloth or sponge are usually enough. Avoid abrasive pads and harsh chemicals because they can strip the protective coating. If you have a wrought iron bench, pay extra attention to joints and hidden corners where moisture can sit. Aluminum benches are the easiest metal option because they do not rust, though they can still get a chalky oxidation layer over time. A simple wash usually removes it.
With a wooden outdoor bench, the biggest difference is that wood is porous. It absorbs moisture, dries out in the sun, and can crack, splinter, or grow mildew if ignored. The exact upkeep depends on the wood. Teak and other dense hardwoods are the most forgiving. They can be left to weather to a silvery gray, but if you want to keep that warm honey color, you need to clean the bench and apply teak oil or sealer once or twice a year. Softer woods like pine or acacia need more protection: a stain, paint, or outdoor wood sealer should be reapplied every one to three years depending on climate. For routine cleaning, use a soft brush, mild soap, and water, then rinse gently. Do not blast the wood with a pressure washer at close range because it can raise the grain and cause splinters. In fall and winter, keep leaves and debris from collecting in the gaps, and if possible, move the bench to a covered spot or use a breathable cover.
So when it comes to metal vs wooden bench upkeep, the real difference is how each material fails: metal shows rust and peeling paint, while wood shows rot, cracks, gray discoloration, and splinters. In terms of time, a metal bench might need a quick wash twice a year and a touch-up only when you see damage. A wooden bench may need a deep clean and a fresh coat of sealant every year or two, which feels more like a project. In terms of cost, metal touch-up paint is inexpensive, while quality wood sealers or teak oils cost more over time. Neither is truly zero-maintenance, but if you want the lowest-fuss option, choose powder-coated aluminum or a dense hardwood like teak. If you buy cheap tubular steel or untreated softwood, expect to spend more time fixing problems later.