Honestly, if a skateboard snaps one slat, you're not looking at a full bench replacement. Our park benches are built with individual slats that bolt to a powder-coated steel frame. That means a single damaged slat can be swapped out without cutting, welding, or special skills.
In most cases, it takes about 10 to 15 minutes. You'll need a socket wrench or an Allen key depending on the model, and maybe a cordless drill to speed things up. The replacement slat drops into the same mounting holes, so there's no measuring or re-drilling. Just remove the two bolts on each end of the broken slat, pull it out, set the new slat in place, and tighten the hardware. If the bolts are rusty, a little penetrating oil helps.
Two things worth checking while you're down there. First, make sure the skateboard impact didn't bend the frame or crack a mounting tab. If the frame is still straight, the new slat will sit flush. Second, match the replacement slat to your bench series. Most of our slats come in standard sizes and finishes, but recycled plastic, wood, and metal slats are not interchangeable—so ordering the correct part number saves time.
For parks and skate-heavy areas, we usually recommend keeping one or two spare slats and a small hardware kit on hand. That way, if a board clips the bench edge, maintenance staff can fix it the same day without waiting on a shipment.
Short answer: it's an easy repair. The bench is designed so the slat is a replaceable wear part, not the whole bench.